Showing 1–48 of 55 results

BULLWARK – BWK-CP1 Center Punch 1/8″

42.00 inc. GST
BULLWARK - Center Punch 1/8"
  • Used for marking metal or making indentations for starting drill holes

BULLWARK – BWK-CCF20 Cold Chisel Flat 20mm x 150mm

148.00 inc. GST
BULLWARK - Cold Chisel Flat 20mm x 150mm
  • One-piece forged construction for strength.
  • Hardened, quenched, and tempered for long life.

BULLWARK – BWK-CCF25 Cold Chisel Flat 25mm x 200mm

190.00 inc. GST
BULLWARK - Cold Chisel Flat 25mm x 200mm
  • One-piece forged construction for strength.
  • Hardened, quenched, and tempered for long life.

BULLWARK – BWK-CCH16 Cold Chisel Hexagonal 16mm x 150mm

127.00 inc. GST
BULLWARK - Cold Chisel Hexagonal 16mm x 150mm
  • Chrome-molybdenum-vanadium air-hardening steel 
  • Carefully hardened and tempered along the full length
  • color may vary

BULLWARK – BWK-CCH22 Cold Chisel Hexagonal 22mm x 200mm

151.00 inc. GST
BULLWARK - Cold Chisel Hexagonal 22mm x 200mm
  • Chrome-molybdenum-vanadium air-hardening steel 
  • Carefully hardened and tempered along the full length
  • color may vary

BULLWARK – BWK-CCH25 Cold Chisel Hexagonal 25mm x 250mm

250.00 inc. GST
BULLWARK - Cold Chisel Hexagonal 25mm x 250mm
  • Chrome-molybdenum-vanadium air-hardening steel 
  • Carefully hardened and tempered along the full length
  • color may vary

BULLWARK – BWK-CCH9 Cold Chisel Hexagonal 9mm x 125mm

102.00 inc. GST
BULLWARK -  Cold Chisel Hexagonal 9mm x 125mm
  • Chrome-molybdenum-vanadium air-hardening steel 
  • Carefully hardened and tempered along the full length
  • color may vary

BULLWARK – BWK-CCO16 Cold Chisel Octagonal 16mm x 150mm

127.00 inc. GST
BULLWARK - Cold Chisel Octagonal 16mm x 150mm
  • Chrome-molybdenum-vanadium air-hardening steel 
  • Carefully hardened and tempered along the full length

BULLWARK – BWK-CCO22 Cold Chisel Octagonal 22mm x 200mm

151.00 inc. GST
BULLWARK - Cold Chisel Octagonal 22mm x 200mm
  • Chrome-molybdenum-vanadium air-hardening steel 
  • Carefully hardened and tempered along the full length

BULLWARK – BWK-CCO9 Cold Chisel Octagonal 9mm x 125mm

102.00 inc. GST
BULLWARK - Cold Chisel Octagonal 9mm x 125mm
  • Chrome-molybdenum-vanadium air-hardening steel 
  • Carefully hardened and tempered along the full length

BULLWARK – BWK-CP2 Center Punch 5/32″

50.00 inc. GST
BULLWARK - Center Punch 5/32"
  • Used for marking metal or making indentations for starting drill holes

BULLWARK – BWK-CP3 Center Punch 3/16″

55.00 inc. GST
BULLWARK - Center Punch 3/16"
  • Used for marking metal or making indentations for starting drill holes

BULLWARK – BWK-CPA5 Center Punch Automatic 5″

507.00 inc. GST
BULLWARK - Center Punch Automatic 5"
  • Automatic center punch is more convenient as they don't require a hammer.
  • Stop drill bits from wandering on plain surfaces.

BULLWARK – BWK-CPA6 Center Punch Automatic 6″

740.00 inc. GST
BULLWARK - Center Punch Automatic 6"
  • Automatic center punch is more convenient as they don't require a hammer.
  • Stop drill bits from wandering on plain surfaces.

BULLWARK – BWK-LP10 Leather Punch 10mm

33.00 inc. GST
BULLWARK - Leather Punch 10mm
  • This hole punch cuts holes in fabric or leather which will accommodate size 0 Grommets & Washers.
  • Use with a rubber or wooden mallet.

BULLWARK – BWK-LP12 Leather Punch 12mm

58.00 inc. GST
BULLWARK - Leather Punch 12mm
  • This hole punch cuts holes in fabric or leather which will accommodate size 0 Grommets & Washers.
  • Use with a rubber or wooden mallet.

BULLWARK – BWK-LP14 Leather Punch 14mm

83.00 inc. GST
BULLWARK - Leather Punch 14mm
  • This hole punch cuts holes in fabric or leather which will accommodate size 0 Grommets & Washers.
  • Use with a rubber or wooden mallet.

BULLWARK – BWK-LP18 Leather Punch 18mm

108.00 inc. GST
BULLWARK - Leather Punch 18mm
  • This hole punch cuts holes in fabric or leather which will accommodate size 0 Grommets & Washers.
  • Use with a rubber or wooden mallet.

BULLWARK – BWK-LP20 Leather Punch 20mm

127.00 inc. GST
BULLWARK - Leather Punch 20mm
  • This hole punch cuts holes in fabric or leather which will accommodate size 0 Grommets & Washers.
  • Use with a rubber or wooden mallet.

BULLWARK – BWK-LP22 Leather Punch 22mm

195.00 inc. GST
BULLWARK - Leather Punch 22mm
  • This hole punch cuts holes in fabric or leather which will accommodate size 0 Grommets & Washers.
  • Use with a rubber or wooden mallet.

BULLWARK – BWK-LP25 Leather Punch 25mm

250.00 inc. GST
BULLWARK - Leather Punch 25mm
  • This hole punch cuts holes in fabric or leather which will accommodate size 0 Grommets & Washers.
  • Use with a rubber or wooden mallet.

BULLWARK – BWK-LP3 Leather Punch 3mm

21.00 inc. GST
BULLWARK - Leather Punch 3mm
  • This hole punch cuts holes in fabric or leather which will accommodate size 0 Grommets & Washers.
  • Use with a rubber or wooden mallet.

BULLWARK – BWK-LP4 Leather Punch 4mm

22.00 inc. GST
BULLWARK - Leather Punch 4mm
  • This hole punch cuts holes in fabric or leather which will accommodate size 0 Grommets & Washers.
  • Use with a rubber or wooden mallet.

BULLWARK – BWK-LP5 Leather Punch 5mm

22.00 inc. GST
BULLWARK - Leather Punch 5mm
  • This hole punch cuts holes in fabric or leather which will accommodate size 0 Grommets & Washers.
  • Use with a rubber or wooden mallet.

BULLWARK – BWK-LP6 Leather Punch 6mm

25.00 inc. GST
BULLWARK - Leather Punch 6mm
  • This hole punch cuts holes in fabric or leather which will accommodate size 0 Grommets & Washers.
  • Use with a rubber or wooden mallet.

BULLWARK – BWK-LP8 Leather Punch 8mm

27.00 inc. GST
BULLWARK - Leather Punch 8mm
  • This hole punch cuts holes in fabric or leather which will accommodate size 0 Grommets & Washers.
  • Use with a rubber or wooden mallet.

BULLWARK – BWK-NPS1 Nail Punch Square Head 1/8″

68.00 inc. GST
BULLWARK - Nail Punch Square Head 1/8"
  • Nail set punch with a tapered point to drive a nail flush with its mounting surface
  • Squarehead provides a flat striking surface and keeps punch from rolling when set down

BULLWARK – BWK-NPS2 Nail Punch Square Head 5/32″

75.00 inc. GST
BULLWARK - Nail Punch Square Head 5/32"
  • Nail set punch with a tapered point to drive a nail flush with its mounting surface
  • Squarehead provides a flat striking surface and keeps punch from rolling when set down

BULLWARK – BWK-NPS3 Nail Punch Square Head 3/16″

83.00 inc. GST
BULLWARK - Nail Punch Square Head 3/16"
  • Nail set punch with a tapered point to drive a nail flush with its mounting surface
  • Squarehead provides a flat striking surface and keeps punch from rolling when set down

BULLWARK – BWK-PP6-1 Pin Punch 6″ 1/6″

54.00 inc. GST
BULLWARK -  Pin Punch 6" 1/6"
  • Special steel striking tools. Hardened for long life.

BULLWARK – BWK-PP6-2 Pin Punch 6″ 3/32″

54.00 inc. GST
BULLWARK - Pin Punch 6" 3/32"
  • Special steel striking tools. Hardened for long life.

BULLWARK – BWK-PP6-3 Pin Punch 6″ 1/8″

54.00 inc. GST
BULLWARK - Pin Punch 6" 1/8"
  • Special steel striking tools. Hardened for long life.

BULLWARK – BWK-PP6-4 Pin Punch 6″ 5/32″

54.00 inc. GST
BULLWARK - Pin Punch 6" 5/32"
  • Special steel striking tools. Hardened for long life.

BULLWARK – BWK-PP6-5 Pin Punch 6″ 3/16″

62.00 inc. GST
BULLWARK - Pin Punch 6" 3/16"
  • Special steel striking tools. Hardened for long life.

BULLWARK – BWK-PP6-6 Pin Punch 6″ 7/32″

62.00 inc. GST
BULLWARK - Pin Punch 6" 7/32"
  • Special steel striking tools. Hardened for long life.

BULLWARK – BWK-PP6-7 Pin Punch 6″ 1/4″

76.00 inc. GST
BULLWARK - Pin Punch 6" 1/4"
  • Special steel striking tools. Hardened for long life.

BULLWARK – BWK-PP6-8 Pin Punch 6″ 5/16″

96.00 inc. GST
BULLWARK - Pin Punch 6" 5/16"
  • Special steel striking tools. Hardened for long life.

BULLWARK – BWK-PP8-1 Pin Punch 8″ 1/6″

99.00 inc. GST
BULLWARK -  Pin Punch 8" 1/6"
  • Special steel striking tools. Hardened for long life.

BULLWARK – BWK-PP8-2 Pin Punch 8″ 3/32″

99.00 inc. GST
BULLWARK - Pin Punch 8" 3/32"
  • Special steel striking tools. Hardened for long life.

BULLWARK – BWK-PP8-3 Pin Punch 8″ 1/8″

104.00 inc. GST
BULLWARK - Pin Punch 8" 1/8"
  • Special steel striking tools. Hardened for long life.

BULLWARK – BWK-PP8-4 Pin Punch 8″ 5/32″

108.00 inc. GST
BULLWARK - Pin Punch 8" 5/32"
  • Special steel striking tools. Hardened for long life.

BULLWARK – BWK-PP8-5 Pin Punch 8″ 3/16″

153.00 inc. GST
BULLWARK - Pin Punch 8" 3/16"
  • Special steel striking tools. Hardened for long life.

BULLWARK – BWK-PP8-6 Pin Punch 8″ 7/32″

155.00 inc. GST
BULLWARK - Pin Punch 8" 7/32"
  • Special steel striking tools. Hardened for long life.

BULLWARK – BWK-PP8-7 Pin Punch 8″ 1/4″

174.00 inc. GST
BULLWARK - Pin Punch 8" 1/4"
  • Special steel striking tools. Hardened for long life.

BULLWARK – BWK-PP8-8 Pin Punch 8″ 5/16″

186.00 inc. GST
BULLWARK - Pin Punch 8" 5/16"
  • Special steel striking tools. Hardened for long life.

BULLWARK – BWK-SP1 Starting Punch 1/8″

70.00 inc. GST
BULLWARK - Starting Punch 1/8"
  • Gradually tapered, self-centering nose aligns holes in multiple parts, positioning them for accurate assembly
  • Made from premium, high carbon steel
  • Straight and true, tip and taper are precisely machined to meet exacting tolerances

BULLWARK – BWK-SP2 Starting Punch 5/32″

72.00 inc. GST
BULLWARK - Starting Punch 5/32"
  • Gradually tapered, self-centering nose aligns holes in multiple parts, positioning them for accurate assembly
  • Made from premium, high carbon steel
  • Straight and true, tip and taper are precisely machined to meet exacting tolerances

BULLWARK – BWK-SP3 Starting Punch 3/16″

88.00 inc. GST
BULLWARK - Starting Punch 3/16"
  • Gradually tapered, self-centering nose aligns holes in multiple parts, positioning them for accurate assembly
  • Made from premium, high carbon steel
  • Straight and true, tip and taper are precisely machined to meet exacting tolerances